Typical Applications:

Well stimulation additive blended with the HCL prior to use to prevent corrosion associated with acid stimulation jobs. SE-30 is designed for high bottom hole temperatures of >240 F. May be used in dilute or concentrated HCL acid. SE-30 is not designed or recommended for 28% HCL at temperatures above 250F.

Application Guidelines:

Bottom Hole Temperature 240 -300 F

20 gallons SE-30 (ptg) per thousand gallons of acid solution. In a 28% HCL solution use 20 gallons/1000 gallons acid solution with a maximum limit of 250 degrees Farenheit.

Typical Properties:

Specific Gravity @ 60 F 0.928

Density, lbs/gal @ 60 F 7.80

Flash Point, (PMCC) F 62

(pH) 6.2

Viscoisty, cps @ 70 F 5.0

Handling Guidelines/Precautions

May be hazardous if inhaled, ingested or absorbed through the skin. Direct contact with eyes may result in severe irritation and damage. Handle only in an open, well ventilated area. For detailed handling precautions, please refer to the Material Safety Data Sheet.

General Ordering Information

For price and shipment information contact your Sepcor Representative at Phone: (281)-752-7272 Fax: (281)-496-6996

Email: support@sepcor.com

All data in this product bulletin should be considered as merely general information; we cannot assume responsibility for the use of the product(s) mentioned herein, the conditions under which they are applied in practice being subject to many variations. Nor can we assume responsibility with regard to certatin applications that may be covered by patents.